1. Single switch, convenient for adjusting the water temperature and the flow.
2. Mixer tap.
3. Waterfall effect created by the flat outlet.
4. With 360° swivel head, suitable for double sink design.
5. Polished chrome plating, to protect the brass body rush by separating the brass part from air.
100% Brand New and High Quality.
Package size: 37*21*7cm
Package weight: 1.18kg
1. Assemble the nut and metal tube, insert one of the rubber gasket;
2. Place the other rubber gasket on the tap’s bottom;
3. The installation hole is preferably between 31-41mm;
4. Screw one of the hose into one of the water inlet pass through the installation hole from below, tighten it appropriately;
5. Pass the hose through the metal tube;
6. Pass the other hose through the metal tube, then screw it into the other inlet, tighten it appropriately;
7. Screw the tube into the bottom of the faucet, adjust it properly, then tighten it appropriately;
8. Connect the hot and cold water with the hoses according to the red and blue sigh on the tap switch, do not install backward. ( Cautions: do not need to disassemble the water tap on each of the above steps. )
1x Water tap
1x Metal tube
2x Rubber gasket